md5sum discrepencies
by Ryan
Hi all! I've recently installed and yum updated 2 indentical boxes, and
for fun and good measure I was running md5sums to see if the updates
worked correctly on both. However:
[root@tsuji etc]# md5sum /usr/sbin/sshd
61759cb28ff270f794a2e7efc15cb965 /usr/sbin/sshd
[root@eri proc]# md5sum /usr/sbin/sshd
1773adfda131e2496fafd898747245e2 /usr/sbin/sshd
Any ideas why? This also concerns me:
[root@tsuji etc]# md5sum /bin/ls
aad0775ac64588d61d258fabd2a777e1 /bin/ls
[root@eri proc]# md5sum /bin/ls
5101a32ed2e5680ccf49190bb42f0a7b /bin/ls
Both boxes are dual homed K6 450Mhz. Anyone have any suggestions? I
would figure they should all be the same, but I've seen stranger things.
Anyone know what the sums should be, or can point me in the direction to
find out?
Regards,
Ryan
19 years, 1 month
Can't rebuild journal of EXT-3 partition
by Longming Lee
Dear friends,
There is a EXT-3 partion in the FC2 hard disk, and it needs to
fsck for something wrong. I do the fsck while booting. But
6 hours passes and it can't be done. I stop fsck and then I
mount it to be EXT-2 OK.
I unmount this broken partition, and try to rebuild the journal of EXT-3,
but it is failure.
[root@nfs2 root]# tune2fs -O ^has_journal /dev/sdb1
tune2fs 1.35 (28-Feb-2004)
Illegal block number passed to ext2fs_unmark_block_bitmap #1632133966
for block bitmap for /dev/sdb1
Segmentation fault
How should I do to fix or rebuild the journal of this EXT-3 broken
partition?
regards,
Longming 3/31
19 years, 1 month
Re: Squirrelmail and Index.php
by Corey Head
--- James Kosin <jkosin(a)beta.intcomgrp.com> wrote:
> (1) Post your httpd.conf file... I'm susspecting
> you have a rewrite
> rule that may be causing the problem.
Here it is--minus the comments and the names have been
changed to protect the innocent--and me too. If you
need the "rest" of the stuff that is in the conf file,
let me know. I'm trying to catch on to the posting
rules here!
ServerTokens OS
ServerRoot "/etc/httpd"
PidFile run/httpd.pid
Timeout 300
KeepAlive Off
MaxKeepAliveRequests 100
KeepAliveTimeout 15
<IfModule prefork.c>
StartServers 8
MinSpareServers 5
MaxSpareServers 20
MaxClients 150
MaxRequestsPerChild 1000
</IfModule>
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
Listen 0.0.0.0:80
LoadModule access_module modules/mod_access.so
LoadModule auth_module modules/mod_auth.so
LoadModule auth_anon_module modules/mod_auth_anon.so
LoadModule auth_dbm_module modules/mod_auth_dbm.so
LoadModule auth_digest_module
modules/mod_auth_digest.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module
modules/mod_vhost_alias.so
LoadModule negotiation_module
modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imap_module modules/mod_imap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_connect_module
modules/mod_proxy_connect.so
LoadModule cache_module modules/mod_cache.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule cgi_module modules/mod_cgi.so
#
# Load config files from the config directory
"/etc/httpd/conf.d".
#
Include conf.d/*.conf
User apache
Group apache
ServerAdmin web(a)myserver.com
ServerName myserver.com:80
UseCanonicalName Off
DocumentRoot "/var/www/html"
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# This should be changed to whatever you set
DocumentRoot to.
#
<Directory "/var/www/html">
Options Indexes FollowSymLinks
AllowOverride None
Order allow,deny
Allow from all
</Directory>
<IfModule mod_userdir.c>
#
# UserDir is disabled by default since it can
confirm the presence
# of a username on the system (depending on home
directory
# permissions).
#
UserDir disable
#
# To enable requests to /~user/ to serve the
user's public_html
# directory, remove the "UserDir disable" line
above, and uncomment
# the following line instead:
#
#UserDir public_html
</IfModule>
DirectoryIndex index.html index.html.var index.php
AccessFileName .htaccess
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
TypesConfig /etc/mime.types
DefaultType text/plain
<IfModule mod_mime_magic.c>
# MIMEMagicFile /usr/share/magic.mime
MIMEMagicFile conf/magic
</IfModule>
HostnameLookups Off
ErrorLog logs/error_log
LogLevel warn
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
\"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
CustomLog logs/access_log combined
ServerSignature On
Alias /icons/ "/var/www/icons/"
<Directory "/var/www/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
Alias /manual "/var/www/manual"
<Directory "/var/www/manual">
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
<IfModule mod_dav_fs.c>
# Location of the WebDAV lock database.
DAVLockDB /var/lib/dav/lockdb
</IfModule>
ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
<Directory "/var/www/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
IndexOptions FancyIndexing VersionSort NameWidth=*
AddIconByEncoding (CMP,/icons/compressed.gif)
x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh
.tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
DefaultIcon /icons/unknown.gif
ReadmeName README.html
HeaderName HEADER.html
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
AddLanguage da .dk
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .et
AddLanguage fr .fr
AddLanguage de .de
AddLanguage he .he
AddLanguage el .el
AddLanguage it .it
AddLanguage ja .ja
AddLanguage pl .po
AddLanguage ko .ko
AddLanguage pt .pt
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pt-br .pt-br
AddLanguage ltz .ltz
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .sv
AddLanguage cs .cz .cs
AddLanguage ru .ru
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
AddLanguage hr .hr
LanguagePriority en da nl et fr de el it ja ko no pl
pt pt-br ltz ca es sv tw
ForceLanguagePriority Prefer Fallback
AddDefaultCharset UTF-8
AddCharset ISO-8859-1 .iso8859-1 .latin1
AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
AddCharset ISO-8859-3 .iso8859-3 .latin3
AddCharset ISO-8859-4 .iso8859-4 .latin4
AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr
.iso-ru
AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb
AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk
AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb
AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251 .win-1251
AddCharset CP866 .cp866
AddCharset KOI8-r .koi8-r .koi8-ru
AddCharset KOI8-ru .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-8 .utf8
AddCharset GB2312 .gb2312 .gb
AddCharset utf-7 .utf7
AddCharset utf-8 .utf8
AddCharset big5 .big5 .b5
AddCharset EUC-TW .euc-tw
AddCharset EUC-JP .euc-jp
AddCharset EUC-KR .euc-kr
AddCharset shift_jis .sjis
AddType application/x-tar .tgz
AddHandler imap-file map
AddHandler type-map var
AddOutputFilter INCLUDES .shtml
Alias /error/ "/var/www/error/"
<IfModule mod_negotiation.c>
<IfModule mod_include.c>
<Directory "/var/www/error">
AllowOverride None
Options IncludesNoExec
AddOutputFilter Includes html
AddHandler type-map var
Order allow,deny
Allow from all
LanguagePriority en es de fr
ForceLanguagePriority Prefer Fallback
</Directory>
# ErrorDocument 400
/error/HTTP_BAD_REQUEST.html.var
# ErrorDocument 401
/error/HTTP_UNAUTHORIZED.html.var
# ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
# ErrorDocument 405
/error/HTTP_METHOD_NOT_ALLOWED.html.var
# ErrorDocument 408
/error/HTTP_REQUEST_TIME_OUT.html.var
# ErrorDocument 410 /error/HTTP_GONE.html.var
# ErrorDocument 411
/error/HTTP_LENGTH_REQUIRED.html.var
# ErrorDocument 412
/error/HTTP_PRECONDITION_FAILED.html.var
# ErrorDocument 413
/error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
# ErrorDocument 414
/error/HTTP_REQUEST_URI_TOO_LARGE.html.var
# ErrorDocument 415
/error/HTTP_SERVICE_UNAVAILABLE.html.var
# ErrorDocument 500
/error/HTTP_INTERNAL_SERVER_ERROR.html.var
# ErrorDocument 501
/error/HTTP_NOT_IMPLEMENTED.html.var
# ErrorDocument 502
/error/HTTP_BAD_GATEWAY.html.var
# ErrorDocument 503
/error/HTTP_SERVICE_UNAVAILABLE.html.var
# ErrorDocument 506
/error/HTTP_VARIANT_ALSO_VARIES.html.var
</IfModule>
</IfModule>
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0
force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
BrowserMatch "Microsoft Data Access Internet
Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
BrowserMatch "^gnome-vfs" redirect-carefully
Alias /webdav1/ /var/www/html/webdav1/
Alias /webdav2/ /var/www/html/webdav2/
<Location />
Dav On
AuthType Basic
AuthName "WebDAV Access"
AuthUserFile /etc/httpd/conf.d/webdav_passwd
<LimitExcept GET POST HEAD OPTIONS>
require user corey
</LimitExcept>
</Location>
NameVirtualHost 123.456.789.10
<VirtualHost 123.456.789.10>
ServerName www.web1.com
ServerAdmin webmaster(a)web1.com
DocumentRoot /var/www/html/web1
DirectoryIndex index.htm
ServerName host.web1.com
ServerAlias web1.com *.web1.com
ErrorLog logs/host.web1.com-error_log
TransferLog logs/host.web1.com-access_log
</VirtualHost>
<VirtualHost 123.456.789.10>
ServerName www.web2.com
ServerAdmin webmaster(a)web2.com
DocumentRoot /var/www/html/web1
DirectoryIndex index.htm
ServerName host.web2.com
ServerAlias web2.com *.web2.com
ErrorLog logs/host.web2.com-error_log
TransferLog logs/host.web2.com-access_log
</VirtualHost>
<VirtualHost 123.456.789.10>
ServerName www.web4.net
ServerAdmin webmaster(a)web4.net
DocumentRoot /var/www/html/web4
DirectoryIndex index.htm
ServerName host.web4.net
ServerAlias web4.net *.web4.net
ErrorLog logs/host.web4.net-error_log
TransferLog logs/host.web4.net-access_log
</VirtualHost>
<VirtualHost 123.456.789.10>
ServerName www.web3.com
ServerAdmin web3(a)yahoo.com
DocumentRoot /var/www/html/web3
DirectoryIndex home.htm
ServerName host.web3.com
ServerAlias web3.com *.web3.com
ErrorLog logs/host.web3.com-error_log
</VirtualHost>
>
> (2) You are using FC3, which means that Susex
(sorry forgot what it is and how to spell it), may be
running. Check your system logfiles for any file
protection errors.
Checked! No errors in any logs. Perhaps I need to
turn on more logging?
> (3) Be sure you have the case correct on the
filename (NO CAPS)...Linux is case sensitive even on
the web.
Yup...checked carefully and all is well on case and
filename.
> James
Thanks!
Corey
__________________________________
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!
http://smallbusiness.yahoo.com/resources/
19 years, 1 month
Trouble Configurating LC_ALL
by rvila＠inictel.gob.pe
i have one page info.php and your code is :
<?php
phpinfo();
echo getenv("LANG")."<br>";
$info=nl_langinfo(CODESET);
echo $info."<br>";
setlocale (LC_ALL,'es_PE');
$info2=n<l_langinfo(CODESET);
echo $info2."<br>";
echo getenv("LANG")."<br>";
?>
well when I execute this in my browser, the page show me information about php,
but in the headers enviroment exist a variable called LANG and this have a
value C.
Also in tHe page, $info is printed how ANSI_X3.4-1968 and $info2 how
ISO-8859-1,
because i use the function setlocale() and getenv("LANG") is printed how C.
Please help me I don't want use the funtion setlocale(); i want know how
configure the varible lang in php or known what make setlocale internaly.
Other thing more is that if i open the console and execute el command php -i
and
the result is different a my page info.php. In console(terminal) the variable
lang is how iso-8859-1 but when execute info.php the variable lang is C
I think that the problem is with entorno X, but i don't secure.
I hope you understand me, but my english is very bad
Thank a lot for all the help that you can give me
Sincerely
Ricardo vila
P.D. i use gnu/linux fedora core 3
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
19 years, 1 month
Re: Speedo fonts when xorg-xfs is updated
by Rahul Sundaram
On Thu, 31 Mar 2005 06:15:57 -0600, Jess Anderson <anderson(a)wisc.edu> wrote:
> When I update xfs, I get these messages on syslog
>
> hypnos xfs[2456]: re-reading config file
> hypnos xfs: xfs -USR1 succeeded
> hypnos xfs[2456]: ignoring font path element /usr/X11R6/lib/X11/fonts/Speedo (unreadable)
>
> //usr/X11R6/lib/X11/fonts contains
>
> drwxr-xr-x 2 root root 20480 Mar 26 14:56 100dpi
> drwxr-xr-x 2 root root 20480 Mar 26 14:56 75dpi
> drwxr-xr-x 2 root root 4096 Oct 19 14:22 CID
> drwxr-xr-x 3 root root 4096 Mar 26 14:56 encodings
> drwxr-xr-x 2 root root 4096 Oct 19 14:22 local
> drwxr-xr-x 2 root root 16384 Mar 26 14:56 misc
> drwxr-xr-x 2 root root 4096 Mar 26 14:56 OTF
> drwxr-xr-x 2 root root 4096 Mar 26 14:56 Speedo
> drwxr-xr-x 2 root root 4096 Oct 19 14:22 TTF
> drwxr-xr-x 2 root root 4096 Mar 26 14:56 Type1
> drwxr-xr-x 2 root root 4096 Mar 31 05:58 util
>
> and Speedo contains
>
> -rw-r--r-- 1 root root 73994 Oct 19 13:05 font0419.spd
> -rw-r--r-- 1 root root 73570 Oct 19 13:05 font0582.spd
> -rw-r--r-- 1 root root 74266 Oct 19 13:05 font0583.spd
> -rw-r--r-- 1 root root 73686 Oct 19 13:05 font0611.spd
> -rw-r--r-- 1 root root 59472 Oct 19 13:05 font0648.spd
> -rw-r--r-- 1 root root 61214 Oct 19 13:05 font0649.spd
> -rw-r--r-- 1 root root 59460 Oct 19 13:05 font0709.spd
> -rw-r--r-- 1 root root 61065 Oct 19 13:05 font0710.spd
> -rw-r--r-- 1 root root 1689 Mar 26 14:56 fonts.dir
> -rw-r--r-- 1 root root 1689 Oct 19 13:05 fonts.scale
>
> What am I missing here? Corruption of the *.spd files or
> the *dir and *scale files? Happened the previous time too.
>
search in bugzilla.redhat.com. I believe there are bug reports related to this
--
Regards,
Rahul Sundaram
19 years, 1 month
Re: xorg-x11-6.8.2-1.FC3.13 appears to not like multiprocessors
by Michael Neef
Seth Alford <setha(a)aracnet.com> wrote:
> I have a dual processor Dell Precision 650. As of today, X will
> freezes shortly after it starts, but, only with the second processor
> enabled. If I go into the BIOS, and disable the second processor,
> then X works. If I re-enable the second processor, X freezes again.
We have several Dell Precision WorkStations, and I see this problem on
exactly 1 machine so far (Dell Precision 450, dual hyperthreading
Xeons). (User logs in using either GNOME oder KDE - machine freezes, power
off/on cycle necessary). Because these are production machines I did not
try to disable SMP but reinstalled the previous xorg-x11 RPMs and the
problem went away. Our other machines with identical hardware don't seem
to be affected - strange.
--
-Micha Neef-
19 years, 1 month
Re: java applet input problem?
by Alimin Bijosono Oei
> On Thu, 31 Mar 2005 19:11:23 +1000, Alimin Bijosono Oei
> <alimin_oei(a)myrealbox.com> wrote:
>
>>> Hi guys,
>>>
>>> I am running FC3 here and recently encountered a problem with
>>> typing inputs to an opened java applet window from
>>> http://www.global-view.com/fxtrekcharts.html. When clicking on
>>> Indicators on the toolbar, and then selecting to one of the
>>> indicators, say Exponential Moving Average > New, a java applet
>>> window is supposed to pop up and allow us to input the
>>> parameters.
>>>
>>> I used to be able to do this but now after updating my Fedora box
>>> to the latest bunch of updates available the problem appears. I
>>> am not sure if this is the problem with the java applet itself or
>>> it is related to java installed on Fedora or something else. Can
>>> anyone verify this? (I tried opening the same page with latest
>>> Opera, Firefox, Mozilla, and Konqueror, all with the same
>>> result). Thanks a lot for any help provided.
>>>
>>> Alimin
>>>
>
>
> Works fine for me. firefox-1.0.2-1.3.1 jre-1.5.0-fcs
>
> If I do exactly what you said, I get a box with: -- Java Applet
> Window EMA Period: [10] [OK] [CANCEL] --
>
> Are you sure you have Java correctly installed?
>
>
> -- ------------------------------------------------------------------
> Gustavo Seabra Graduate Student Chemistry Dept. Kansas State
> University Registered Linux user number 381680
> ------------------------------------------------------------------ If
> at first you don't succeed... ...skydiving is not for you.
Thanks Gustavo,
Yes, you have got the expected result. This is very strange. I am not
sure whether this is problem with playing wine/winetools package or
having the j2re package from dag wieers, but I managed to solve this
problem by removing both of them and get the java plugin from jre-1.5.0
linked to my browser i.e. firefox. Thanks for the confirmation.
Cheers,
Alimin
19 years, 1 month
xorg-x11-6.8.2-1.FC3.13 appears to not like multiprocessors
by Seth Alford
I have a dual processor Dell Precision 650. As of today, X will freezes
shortly after it starts, but, only with the second processor enabled. If
I go into the BIOS, and disable the second processor, then X works. If I
re-enable the second processor, X freezes again.
Two things happened today.
1. I opened up the machine and blew out all of the dust. I could have jostled
something and caused the second processor to break.
2. This morning up2date installed a new version of xorg software:
[Wed Mar 30 07:13:27 2005] up2date installing packages: ['foomatic-3.0.2-13.3', 'krb5-devel-1.3.6-5', 'krb5-libs-1.3.6-5', 'krb5-workstation-1.3.6-5', 'telnet-0.17-32.FC3.2', 'xorg-x11-6.8.2-1.FC3.13', 'xorg-x11-Mesa-libGL-6.8.2-1.FC3.13', 'xorg-x11-Mesa-libGLU-6.8.2-1.FC3.13', 'xorg-x11-Xdmx-6.8.2-1.FC3.13', 'xorg-x11-Xnest-6.8.2-1.FC3.13', 'xorg-x11-Xvfb-6.8.2-1.FC3.13', 'xorg-x11-deprecated-libs-6.8.2-1.FC3.13', 'xorg-x11-deprecated-libs-devel-6.8.2-1.FC3.13', 'xorg-x11-devel-6.8.2-1.FC3.13', 'xorg-x11-doc-6.8.2-1.FC3.13', 'xorg-x11-font-utils-6.8.2-1.FC3.13', 'xorg-x11-libs-6.8.2-1.FC3.13', 'xorg-x11-sdk-6.8.2-1.FC3.13', 'xorg-x11-tools-6.8.2-1.FC3.13', 'xorg-x11-twm-6.8.2-1.FC3.13', 'xorg-x11-xauth-6.8.2-1.FC3.13', 'xorg-x11-xdm-6.8.2-1.FC3.13', 'xorg-x11-xfs-6.8.2-1.FC3.13']
In the process of diagnoising this problem I logged in on several of the
control-alt-FN alternative screens, while the second processor was enabled.
I was able to run multiple du processes, and the machine didn't freeze.
So I don't think that I broke processor 2.
I hit upon the idea of trying to disable the second processor because I had
seen references to X freezes on this list. One suggestion to fix it was to
disable hyperthreading, which simlates having a second processor. I tried
that. It worked. But now I only have half of my available processors
running. Yes, most of the time, surfing the web, I wouldn't notice it.
But when I'm doing multiple tar -j's for a backup, I will.
So here are my questions:
1. Anyone else running FC3 on a dual processor? Are you seeing this problem?
2. Would this be better reported here, or to xorg? Does xorg mind having
bugs submitted against xorg packages with a "FC3" as part of the package
name? Or are they going to tell me something like "Oh, those packages
were modified by the Fedora project. We won't do anything about this
problem until you show us that it happened with our unadulterated packages."
3. Does it matter that the bogomips on the second processor are not equal
to the bogomips on the first processor? (I would include the 2 different
numbers here, but /proc/cpuinfo is only telling me about the first
processor, since the second processor is diabled in BIOS.)
4. How to go back to the previous xorg release? Get it from the fedora
web page?
Thanks,
--Seth Alford
setha(a)aracnet.com
19 years, 1 month
java applet input problem?
by Alimin Bijosono Oei
Hi guys,
I am running FC3 here and recently encountered a problem with typing
inputs to an opened java applet window from
http://www.global-view.com/fxtrekcharts.html. When clicking on
Indicators on the toolbar, and then selecting to one of the indicators,
say Exponential Moving Average > New, a java applet window is supposed
to pop up and allow us to input the parameters.
I used to be able to do this but now after updating my Fedora box to the
latest bunch of updates available the problem appears. I am not sure if
this is the problem with the java applet itself or it is related to java
installed on Fedora or something else. Can anyone verify this? (I
tried opening the same page with latest Opera, Firefox, Mozilla, and
Konqueror, all with the same result). Thanks a lot for any help provided.
Alimin
19 years, 1 month
