Re: confirm a4b741f59c78f316cdbf0091bd1ddd48207edb33
by Rick Wagner
On Wednesday 23 February 2005 1:12 am, fedora-list-request(a)redhat.com wrote:
> Your membership in the mailing list fedora-list has been disabled due
> to excessive bounces The last bounce received from you was dated
> 23-Feb-2005. You will not get any more messages from this list until
> you re-enable your membership. You will receive 3 more reminders like
> this before your membership in the list is deleted.
>
> To re-enable your membership, you can simply respond to this message
> (leaving the Subject: line intact), or visit the confirmation page at
>
>
> http://www.redhat.com/mailman/confirm/fedora-list/a4b741f59c78f316cdbf0091b
>d1ddd48207edb33
>
>
> You can also visit your membership page at
>
>
> http://www.redhat.com/mailman/options/fedora-list/wagnerric%40condor.cxo.cp
>qcorp.net
>
>
> On your membership page, you can change various delivery options such
> as your email address and whether you get digests or not. As a
> reminder, your membership password is
>
> LetMeFedoraList
>
> If you have any questions or problems, you can contact the list owner
> at
>
> fedora-list-owner(a)redhat.com
19 years, 3 months
lastlog is huge
by david smethurst
hi all
ive been trying to ghost over my drives from 160gb to a 36gb and
couldnt figure out why it keep saying that the destination drive was too
small.
then i found this:
in /var/log/lastlog is 1168.0GB
its locked of course but please what can i do about this and why is it
so big?
the drive is not big enough for the size so something else is wrong
question? how can i tell how big everything is?
i tried to use the file size view in konqueror and it just keeps locking
up all the time so that i cant use it anymore and go to the home
directory
thanks for any help
david
19 years, 3 months
Static Kernel booting issues... for server oriented custome kernel
by jery_wang
Ran in to a fascinating problem,
Background:
I need a custome compiled kernel that is static.. (i.e. all drivers built into the kernel... not modular) for a server system that is being built.
I have generated 2 kernels:
1 with module loading enabled.
1 with module loading disabled.
For the server system the kernel will be deployed on module loading must be disabled.
Problem:
If I try to boot the kernel with module loading disabled and the boot process halts with failure to open initial console. But, I boot the kernel with module loading enabled, and the boot proceeds fine everything functions.
The problem may be in the way udev is setup in the fedora core 3 initialization.
Questions:
1) Has anyone tried turning module loading off and booted
successfully? If so I would appreciate knowing how you
solved the boot problem I have run into.
2) Does anyone have a fix or suggestions of a fix for the
sysinit scripts for the system.
Thanks for any suggestions...
D. Lissimore
--
This is an email sent via the webforum on http://fcp.homelinux.org
19 years, 3 months
RE: Compiling ftape modules
by Simon Slater
> ... So my question is, what do I
> substitute
> for "foo.o" in the above makefile? My strategy is going to be 1) Copy all
> .c and .h files to a temp directory. 2) Create Makefile as above. 3)
> make. 4) Copy *.ko modules to appropriate directory in /lib/modules.
> I would appreciate any help anyone can give, and perhaps it
> is apparent
> that I need a little more handholding than someone who writes their own
> makefiles before breakfast...
I too am interested in answers to this question. I am trying to get a
Colorado T1000 working in FC3.
Simon.
19 years, 3 months
Update on screen savers
by JERRY WHITMIRE
I was going to tell witch ones that would not work but it is better to tell
you witch ones that do work and that is in banners & pictures [banners &
slideshow] are the only ones that works.
In desktop distortions [ science] is the only one that works.
in flying things [lines work and tux works in a small screen in the upper
left conner ]
whirlwind warpx has 99% cpu usage.
in fractals none works
in gadgets & simulations [ xflames 99% cpu usage] none work
illusions of depth none works
in miscellaneous none works
in open gl none works
rapid motions none works.
visit to flatlands { apple 2 99% cpu usage} pong 99% cpu usage.
set it to random the screen savers work like they should.
Only [four] out of all of them not very good with my computer at all .
this is with Fedora core 3 and it is up2date.
And i do like noof the best .
This is why i need some advice.
THANKS AGAIN
_________________________________________________________________
On the road to retirement? Check out MSN Life Events for advice on how to
get there! http://lifeevents.msn.com/category.aspx?cid=Retirement
19 years, 3 months
Fedora Core 2: initrd failed to mount ext3 root fs.
by KokHow Teh
Hi list;
I just installed Fedora Core 2 last 2 days. The binaries work fine
from the installation CDs that I have no problem installing the full system
and booting up the machine i686 P4. However, when I build the kernel from
the source with the default configuration for arch/i386, booting up the
machine failed due to initrd failing to mount the ext3 root file system. It
failed when linuxrc trying to mount the root fs with pivot_root(). Any
insight is appreciated.
Thanks.
Regards,
TEH
19 years, 3 months
how to neutralize the control-space key-binding
by Mitsuho Iizuka
Hi,
Does anyone know how to neutralize(destroy) the control-space
key-binding to htt? kanji-input subwindow ?
I have just noticed both control-space and shift-space binded to kanji
input small subwindow on all windows after daily yum updates. I think
just shift-space key-binding is enough to have htt? subwindow because
I can not specify region by control-space especially on emacs.
Thanks in advance.
// M. Iizuka
19 years, 3 months
Re: Fedora Core 2: initrd failed to mount ext3 root fs.
by KokHow Teh
Hi;
I used the configuration under /boot and with ramdisk support as
verified in `make xconfig`. Unfortunately I can't (or I don't know) how to
capture the boot console and post it here. However, I saw the ramdisk
booting fine. It is only when the system is about to mount the ext3 rootfs
it fails. Any idea what's wrong with that?
Regards,
TEH
> I just installed Fedora Core 2 last 2 days. The binaries work fine
> from the installation CDs that I have no problem installing the full
system
> and booting up the machine i686 P4. However, when I build the kernel from
> the source with the default configuration for arch/i386, booting up the
Which configuration is that? The one the Fedora Core 2 kernel comes with
under /boot?
> machine failed due to initrd failing to mount the ext3 root file system.
It
> failed when linuxrc trying to mount the root fs with pivot_root(). Any
> insight is appreciated.
Lacking ramdisk support?
> TEH
Alexander
--
Alexander Dalloz | Enger, Germany | GPG http://pgp.mit.edu 0xB366A773
legal statement: http://www.uni-x.org/legal.html
Fedora Core 2 GNU/Linux on Athlon with kernel 2.6.10-1.14_FC2smp
Serendipity 02:41:07 up 8 days, 13:49, load average: 0.15, 0.21, 0.26
--
fedora-list mailing list
fedora-list(a)redhat.com
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
19 years, 3 months
RE: Webmin / Usermin and port blocking
by Aaron M. Hirsch
Setup port forwarding via iptables, or you could utilize something like
dnydns's webhop service
-----Original Message-----
From: Bob Brennan [mailto:rbrennan96@gmail.com]
Sent: Monday, February 28, 2005 4:31 PM
To: For users of Fedora Core releases
Subject: Webmin / Usermin and port blocking
Webmin and Usermin are accessed remotely through ports 10000 and 20000
respectively - as in http://www.myserver.net:20000
I work in a company that blocks port 20000 and all other non-essential
outgoing port requests. Are there any alternative ways of accessing a
port-bound service like this to get around secure large company sites
that block direct port connections?
I guess what I'm asking is about ways to access Usermin as a straight
HTTP:// connection (ie http://www.myserver.net/usermin) rather than port
20000 by making changes on my server.
Thanks in advance,
bob
--
fedora-list mailing list
fedora-list(a)redhat.com
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
19 years, 3 months
up2date: ImportError: /lib/libssl.so.4: undefined symbol: krb5_cc_get_principal
by Peter Connolly
After upgrading to RedHat Fedora Core 3, I run into the following
problem with up2date after filling in the 'su' password prompt:
- - - - -
[peterc@popeye ~]$ up2date
Traceback (most recent call last):
File "/usr/sbin/up2date", line 27, in ?
from up2date_client import repoDirector
File "/usr/share/rhn/up2date_client/repoDirector.py", line 5, in ?
import rhnChannel
File "/usr/share/rhn/up2date_client/rhnChannel.py", line 10, in ?
import up2dateAuth
File "/usr/share/rhn/up2date_client/up2dateAuth.py", line 5, in ?
import rpcServer
File "/usr/share/rhn/up2date_client/rpcServer.py", line 22, in ?
from rhn import rpclib
File "/usr/lib/python2.3/site-packages/rhn/__init__.py", line 11, in ?
import rpclib
File "/usr/lib/python2.3/site-packages/rhn/rpclib.py", line 14, in ?
import transports
File "/usr/lib/python2.3/site-packages/rhn/transports.py", line 24, in ?
import connections
File "/usr/lib/python2.3/site-packages/rhn/connections.py", line 14, in ?
import SSL
File "/usr/lib/python2.3/site-packages/rhn/SSL.py", line 15, in ?
from OpenSSL import SSL, crypto
File "/usr/lib/python2.3/site-packages/OpenSSL/__init__.py", line 11, in ?
import rand, crypto, SSL, tsafe
ImportError: /lib/libssl.so.4: undefined symbol: krb5_cc_get_principal
[peterc@popeye ~]$
- - - - -
I tried the approach of removing the krb lib entry from /etc/ld.so.conf:
http://www.redhat.com/archives/fedora-list/2004-January/msg00831.html
but still get this error. I also tried upgrading 'up2date' to
up2date-4.3.69-1, the latest version that I could find.
Any ideas? Thanks!
pc
19 years, 3 months
