F10: sound vanishing after some time (Dell E6500)
by wwp
Hello there,
not sure it is pulseaudio to blame yet (and again), maybe simply an
Alsa bug or incompatibility. I've recently installed Fedora 10 on a
brand new Dell Latitude E6500 laptop.
Few hours after the system has booted (an unpredictable amount of time)
sounds are simply not playing anymore - tried w/ apps, aplay, mplayer.
Did somebody experience the same? Or any clue where to investigate or
find a fix?
I'm running GNOME and default sound settings (pulseaudio, alsa), here
are some excerpts of `lspci -vvv` concerning the audio system:
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Dell Device 024f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f6adc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
And here is the output of a `grep -iE
'imklog|pulse|sound|snd|audio|alsa' /var/log/messages`, it shows
several reboots across last 4 days, mostly to restore sound:
Feb 22 04:50:20 localhost kernel: imklog 3.21.10, log source = /proc/kmsg started.
Feb 22 10:55:57 localhost pulseaudio[5176]: module-alsa-sink.c: Error opening PCM device front:0: Invalid argument
[repeated n times]
Feb 22 22:32:14 localhost pulseaudio[5176]: module-alsa-sink.c: Error opening PCM device front:0: Invalid argument
Feb 23 09:16:48 localhost pulseaudio[5176]: module-hal-detect.c: Error getting capability: org.freedesktop.Hal.NoSuchDevice: No device with id /org/freedesktop/Hal/devices/platform_parport_pc_888
Feb 23 09:16:48 localhost pulseaudio[5176]: module-hal-detect.c: Error getting capability: org.freedesktop.Hal.NoSuchDevice: No device with id /org/freedesktop/Hal/devices/platform_parport_pc_956
Feb 23 09:48:36 localhost kernel: imklog 3.21.10, log source = /proc/kmsg started.
Feb 23 09:48:49 localhost bluetoothd[2610]: Parsing /etc/bluetooth/audio.conf failed: No such file or directory
Feb 23 09:49:45 localhost pulseaudio[3493]: main.c: Called SUID root and real-time and/or high-priority scheduling was requested in the configuration. However, we lack the necessary privileges:
Feb 23 09:49:45 localhost pulseaudio[3489]: pid.c: Stale PID file, overwriting.
Feb 23 09:49:45 localhost pulseaudio[3493]: main.c: We are not in group 'pulse-rt', PolicyKit refuse to grant us the requested privileges and we have no increase RLIMIT_NICE/RLIMIT_RTPRIO resource limits.
Feb 23 09:49:45 localhost pulseaudio[3493]: main.c: For enabling real-time/high-priority scheduling please acquire the appropriate PolicyKit privileges, or become a member of 'pulse-rt', or increase the RLIMIT_NICE/RLIMIT_RTPRIO resource limits for this user.
Feb 23 09:49:49 localhost pulseaudio[3520]: pid.c: Daemon already running.
Feb 23 09:52:52 localhost pulseaudio[3489]: module-alsa-sink.c: Increasing wakeup watermark to 40.00 ms
Feb 23 10:40:01 localhost kernel: imklog 3.21.10, log source = /proc/kmsg started.
Feb 23 10:40:14 localhost bluetoothd[2597]: Parsing /etc/bluetooth/audio.conf failed: No such file or directory
Feb 23 10:41:09 localhost pulseaudio[3441]: pid.c: Stale PID file, overwriting.
Feb 23 10:41:09 localhost pulseaudio[3444]: main.c: Called SUID root and real-time and/or high-priority scheduling was requested in the configuration. However, we lack the necessary privileges:
Feb 23 10:41:09 localhost pulseaudio[3444]: main.c: We are not in group 'pulse-rt', PolicyKit refuse to grant us the requested privileges and we have no increase RLIMIT_NICE/RLIMIT_RTPRIO resource limits.
Feb 23 10:41:09 localhost pulseaudio[3444]: main.c: For enabling real-time/high-priority scheduling please acquire the appropriate PolicyKit privileges, or become a member of 'pulse-rt', or increase the RLIMIT_NICE/RLIMIT_RTPRIO resource limits for this user.
Feb 23 10:41:12 localhost pulseaudio[3493]: pid.c: Daemon already running.
Feb 23 14:01:29 localhost kernel: imklog 3.21.10, log source = /proc/kmsg started.
Feb 23 14:01:41 localhost bluetoothd[2653]: Parsing /etc/bluetooth/audio.conf failed: No such file or directory
Feb 23 14:02:36 localhost pulseaudio[3509]: main.c: Called SUID root and real-time and/or high-priority scheduling was requested in the configuration. However, we lack the necessary privileges:
Feb 23 14:02:36 localhost pulseaudio[3509]: main.c: We are not in group 'pulse-rt', PolicyKit refuse to grant us the requested privileges and we have no increase RLIMIT_NICE/RLIMIT_RTPRIO resource limits.
Feb 23 14:02:36 localhost pulseaudio[3509]: main.c: For enabling real-time/high-priority scheduling please acquire the appropriate PolicyKit privileges, or become a member of 'pulse-rt', or increase the RLIMIT_NICE/RLIMIT_RTPRIO resource limits for this user.
Feb 23 14:02:36 localhost pulseaudio[3517]: pid.c: Stale PID file, overwriting.
Feb 23 14:02:39 localhost pulseaudio[3561]: pid.c: Daemon already running.
Feb 23 14:06:09 localhost pulseaudio[3517]: module-alsa-sink.c: Increasing wakeup watermark to 40.00 ms
Feb 23 14:06:52 localhost pulseaudio[3517]: module-alsa-sink.c: Increasing wakeup watermark to 80.00 ms
Feb 23 16:14:14 localhost pulseaudio[3517]: module-alsa-sink.c: Increasing wakeup watermark to 160.00 ms
Feb 24 08:41:10 localhost pulseaudio[3517]: module-alsa-sink.c: Increasing wakeup watermark to 243.94 ms
[repeated n times]
Feb 24 11:50:19 localhost pulseaudio[3517]: module-alsa-sink.c: Increasing wakeup watermark to 243.94 ms
Feb 24 12:40:41 localhost pulseaudio[3517]: module-alsa-sink.c: ALSA woke us up to write new data to the device, but there was actually nothing to write! Most likely this is an ALSA driver bug. Please report this issue to the PulseAudio developers.
Feb 24 12:41:05 localhost pulseaudio[3517]: module-alsa-sink.c: ALSA woke us up to write new data to the device, but there was actually nothing to write! Most likely this is an ALSA driver bug. Please report this issue to the PulseAudio developers.
Feb 24 13:08:29 localhost pulseaudio[3517]: module-alsa-sink.c: Error opening PCM device front:0: Invalid argument
[repeated n times]
Feb 24 13:44:36 localhost pulseaudio[3517]: module-alsa-sink.c: Error opening PCM device front:0: Invalid argument
Feb 24 13:50:34 localhost kernel: pulseaudio[3517]: segfault at 415898 ip 00415898 sp bfc16d7c error 14 in libselinux.so.1[43b000+1a000]
Feb 24 13:56:26 localhost pulseaudio[2471]: main.c: Called SUID root and real-time and/or high-priority scheduling was requested in the configuration. However, we lack the necessary privileges:
Feb 24 13:56:26 localhost pulseaudio[2471]: main.c: We are not in group 'pulse-rt', PolicyKit refuse to grant us the requested privileges and we have no increase RLIMIT_NICE/RLIMIT_RTPRIO resource limits.
Feb 24 13:56:26 localhost pulseaudio[2471]: main.c: For enabling real-time/high-priority scheduling please acquire the appropriate PolicyKit privileges, or become a member of 'pulse-rt', or increase the RLIMIT_NICE/RLIMIT_RTPRIO resource limits for this user.
Feb 24 13:56:26 localhost pulseaudio[2475]: pid.c: Stale PID file, overwriting.
Feb 24 13:56:27 localhost pulseaudio[2475]: alsa-util.c: Error opening PCM device hw:0: Permission denied
Feb 24 13:56:27 localhost pulseaudio[2475]: module.c: Failed to load module "module-alsa-sink" (argument: "device_id=0 sink_name=alsa_output.pci_8086_293e_sound_card_0_alsa_playback_0 tsched=1"): initialization failed.
Feb 24 13:56:27 localhost pulseaudio[2475]: alsa-util.c: Error opening PCM device hw:0: Permission denied
Feb 24 13:56:27 localhost pulseaudio[2475]: module.c: Failed to load module "module-alsa-source" (argument: "device_id=0 source_name=alsa_input.pci_8086_293e_sound_card_0_alsa_capture_0 tsched=1"): initialization failed.
Feb 24 13:57:04 localhost pulseaudio[2604]: main.c: This program is not intended to be run as root (unless --system is specified).
Feb 25 11:01:45 localhost pulseaudio[2475]: module-hal-detect.c: Error getting capability: org.freedesktop.Hal.NoSuchDevice: No device with id /org/freedesktop/Hal/devices/platform_parport_pc_888
Feb 25 11:01:45 localhost pulseaudio[2475]: module-hal-detect.c: Error getting capability: org.freedesktop.Hal.NoSuchDevice: No device with id /org/freedesktop/Hal/devices/platform_parport_pc_956
Feb 25 11:01:45 localhost pulseaudio[2475]: module-hal-detect.c: Error getting capability: org.freedesktop.Hal.NoSuchDevice: No device with id /org/freedesktop/Hal/devices/platform_parport_pc_632
Feb 25 11:04:58 localhost kernel: imklog 3.21.10, log source = /proc/kmsg started.
Feb 25 11:05:10 localhost bluetoothd[2572]: Parsing /etc/bluetooth/audio.conf failed: No such file or directory
Feb 25 11:06:01 localhost pulseaudio[3450]: main.c: Called SUID root and real-time and/or high-priority scheduling was requested in the configuration. However, we lack the necessary privileges:
Feb 25 11:06:01 localhost pulseaudio[3450]: main.c: We are not in group 'pulse-rt', PolicyKit refuse to grant us the requested privileges and we have no increase RLIMIT_NICE/RLIMIT_RTPRIO resource limits.
Feb 25 11:06:01 localhost pulseaudio[3450]: main.c: For enabling real-time/high-priority scheduling please acquire the appropriate PolicyKit privileges, or become a member of 'pulse-rt', or increase the RLIMIT_NICE/RLIMIT_RTPRIO resource limits for this user.
Feb 25 11:06:05 localhost pulseaudio[3510]: pid.c: Daemon already running.
Feb 25 11:13:36 localhost pulseaudio[3465]: module-alsa-sink.c: Increasing wakeup watermark to 40.00 ms
Feb 25 11:18:48 localhost pulseaudio[3465]: module-alsa-sink.c: Increasing wakeup watermark to 80.00 ms
Feb 25 11:20:02 localhost pulseaudio[3465]: module-alsa-sink.c: Increasing wakeup watermark to 160.00 ms
Feb 25 11:21:02 localhost pulseaudio[3465]: module-alsa-sink.c: Increasing wakeup watermark to 243.94 ms
[repeated n times]
Feb 25 15:15:54 localhost pulseaudio[3465]: module-alsa-sink.c: Increasing wakeup watermark to 243.94 ms
Feb 25 15:30:06 localhost pulseaudio[29709]: main.c: Called SUID root and real-time and/or high-priority scheduling was requested in the configuration. However, we lack the necessary privileges:
Feb 25 15:30:06 localhost pulseaudio[29709]: main.c: We are not in group 'pulse-rt', PolicyKit refuse to grant us the requested privileges and we have no increase RLIMIT_NICE/RLIMIT_RTPRIO resource limits.
Feb 25 15:30:06 localhost pulseaudio[29709]: main.c: For enabling real-time/high-priority scheduling please acquire the appropriate PolicyKit privileges, or become a member of 'pulse-rt', or increase the RLIMIT_NICE/RLIMIT_RTPRIO resource limits for this user.
Feb 25 15:30:51 localhost pulseaudio[29770]: main.c: This program is not intended to be run as root (unless --system is specified).
Feb 25 15:30:51 localhost pulseaudio[29771]: module-alsa-sink.c: Increasing wakeup watermark to 40.00 ms
Feb 25 15:32:09 localhost pulseaudio[29712]: module-alsa-sink.c: Increasing wakeup watermark to 40.00 ms
Feb 25 15:32:16 localhost pulseaudio[29712]: module-alsa-sink.c: Increasing wakeup watermark to 80.00 ms
Feb 25 15:32:25 localhost pulseaudio[29712]: module-alsa-sink.c: Increasing wakeup watermark to 160.00 ms
Feb 25 17:24:33 localhost pulseaudio[29712]: module-alsa-sink.c: Increasing wakeup watermark to 243.94 ms
[repeated n times]
Feb 26 09:14:47 localhost pulseaudio[29712]: module-alsa-sink.c: Increasing wakeup watermark to 243.94 ms
Regards,
--
wwp
15 years, 2 months
Force to update to f10, but yum can't bring it into synch.
by Gene Heskett
Greetings;
I killed x trying to make this )*(&%$ video card work so I put the f10 dvd in
and updated it to F10.
Two immediate problems.
1. Grub must have miss-fired, all I get is the grub shell and I have to enter
all the boot data line by line in order to boot. Is that a fresh grub-
install?
2. Yum wants to update 435 packages, but many dependencies stop it. What is
the f10 procedure to bring that up to speed now?
--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
That's life.
What's life?
A magazine.
How much does it cost?
Two-fifty.
I only have a dollar.
That's life.
15 years, 2 months
can nat work in vlan
by ann kok
Hi
I want to configure 802.1q 3 vlans
eg:
192.168.1.0/24 vlan2
192.168.2.0/24 vlan3 ....
can nat work in those vlan?
how does it map?
ls it
iptables --append FORWARD --in-interface eth1.2 -j ACCEPT
iptables --append FORWARD --in-interface eth1.3 -j ACCEPT
Thank you
__________________________________________________________________
Yahoo! Canada Toolbar: Search from anywhere on the web, and bookmark your favourite sites. Download it now at
http://ca.toolbar.yahoo.com.
15 years, 2 months
Windows mobile
by RAMAKISHOREBABU KOPPULA
Can we synchronize windows mobile with f10 email clents?
K. Rama Kishore Babu
15 years, 2 months
Mount added drive -
by Bob Goodwin
This is an F-10 updated box to which I've added a second drive which is
not mounting automatically at boot. I have to mount it after I log in.
Obviously I've messed up something in configuration but I haven't been
able to find it.
I am not sure what ftab should look like but presently it is:.
[root@box9 bobg]# cat /etc/fstab
#
# /etc/fstab
# Created by anaconda on Tue Feb 24 04:01:45 2009
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or vol_id(8) for
more info
#
/dev/VolGroup01/LogVol00 / ext3
defaults 1 1
UUID=3c6742c9-0f68-4390-b323-b962596822d6 /boot
ext3 defaults 1 2
tmpfs /dev/shm tmpfs
defaults 0 0
devpts /dev/pts devpts
gid=5,mode=620 0 0
sysfs /sys sysfs
defaults 0 0
proc /proc proc
defaults 0 0
/dev/VolGroup01/LogVol01 swap swap
defaults 0 0
/dev/VolGroup01/LogVol02 UUID=tvOhFL-1sDH-fk5y-zv00-PR6c-cA2F-xyOTAP
ext3 defaults 1 2
I can mount it:
[root@box9 bobg]# mount /dev/VolGroup01/LogVol02
[root@box9 bobg]# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/VolGroup01-LogVol00
5289592 3210420 2025496 62% /
/dev/sda2 194449 20859 163550 12% /boot
tmpfs 1292316 76 1292240 1% /dev/shm
/dev/mapper/VolGroup01-LogVol02
76923936 222308 72794044 1%
/home/bobg/UUID=tvOhFL-1sDH-fk5y-zv00-PR6c-cA2F-xyOTAP
And df shows:
[root@box9 bobg]# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/VolGroup01-LogVol00
5289592 3210420 2025496 62% /
/dev/sda2 194449 20859 163550 12% /boot
tmpfs 1292316 76 1292240 1% /dev/shm
/dev/mapper/VolGroup01-LogVol02
76923936 222308 72794044 1%
/home/bobg/UUID=tvOhFL-1sDH-fk5y-zv00-PR6c-cA2F-xyOTAP
And lvscan:
[root@box9 bobg]# lvscan
ACTIVE '/dev/VolGroup01/LogVol00' [5.12 GB] inherit
ACTIVE '/dev/VolGroup01/LogVol01' [4.41 GB] inherit
ACTIVE '/dev/VolGroup01/LogVol02' [74.53 GB] inherit
I would like the second drive to be an extension of the first.
Can anyone tell me what I have done wrong?
Bob
15 years, 2 months
Account, password problem with sqlplus in Oracle 10g(10201_companion_linux32)
by gmspro
Hi,
I installed Oracle 10g(10201_companion_linux32.zip).
After extracting got companion directory.
Installing going to that directory "/u01/app/oracle/product/10.2.0/db_1/bin"
I ran ./sqlplus command.
But now I can't type the user name and password because everything is denied.
When installing ,I selected companion option as I got an error selecting the Oralce 10g Database option.I was not prompted for account and password.
There was an option during installation for
i)Wschema
ii)hostname
iii)port
iv)sid
like this.
Now what should I do?Is there any option for creating account and password?
Can anyone tell?
I am using Fedora 10.
Thanks
15 years, 2 months
FC, Samba, and permissions problems
by Gary Stainburn
I've just set up a new FC9 system with Samba and I'm having a problem
I've set security to share, and then set up the following share
[reef]
comment = Reef shared folder
path = /user/remote/reef
writeable = yes
browseable = yes
guest ok = yes
guest only = yes
valid users = gary
force user = gary
I've also got the matching directory structure
ls -ld / /user /user/remote/ /user/remote/reef/
drwxr-xr-x 22 root root 4096 2009-02-24 18:17 /
drwxr-xr-x 3 root root 4096 2009-02-24 17:26 /user
drwxr-xr-x 3 gary gary 4096 2009-02-24 17:26 /user/remote/
drwxr-xr-x 2 gary gary 4096 2009-02-24 17:26 /user/remote/reef/
However, when I try to access it from a WinXP machine I get the following
error both on the Windows PC and the Samba logs.
[2009/02/25 10:29:40, 0] smbd/service.c:make_connection_snum(1156)
'/user/remote/reef' does not exist or permission denied when connecting to
[reef] Error was Permission denied
Anyone know what I've missed?
Gary
--
Gary Stainburn
This email does not contain private or confidential material as it
may be snooped on by interested government parties for unknown
and undisclosed purposes - Regulation of Investigatory Powers Act, 2000
15 years, 2 months
printout sending control codes to the console?
by Konstantin Svist
I have a script which prints out some data to the terminal, which I keep
in a screen session.
Often times I see indecipherable characters printed out and the output
freezes - I'm guessing some control code is being triggered from the
printout.
Is there a way to prevent this?
15 years, 2 months
Keyboard settings are lost after each reboot
by Paul Smith
Dear All,
After the last updates were installed, the settings of the layout of
my keyboard does not survive to a reboot; I have to reset it to my
language after each reboot. Any ideas?
Thanks in advance,
Paul
15 years, 2 months
has K3B been abandoned?
by Fred Silsbee
K3b is a piece of work...
I have 2 CD/DVD burner drives
Plextor $120+
Sony $50
Fedora doesn't like the Plextor...I guess
after downloading F10 for 9.5 hours, I tried to burn a ISO-DVD.
The simplest operation?
I wasted 4 blanks making 3 final copies that haved been checked to be good!.
The Plextor would get an error and then hang K3B
I'd kill it with kill -9 and then the drive would be locked up and even hung the eject command.
I had to reboot to open the drive. Sometimes I have to reboot to do a second operation!
and even once the "bring things back" facility had the #$%& thing running again.
OH YES! an old error reported forever
When making an ISO DVD, the verify write facility still doesn't work
even on the Sony drive. It says "couldn't find a DVD to verify.
Make things easy: if there is an error:
(1) release the drive announcing ithat the DVD is no longer blank!
(2) eject the DVD
(3) terminate all processes and subprocesses that stay running(i.e. die and go away)
(4) work on the program some more.
15 years, 2 months
